Cart  

Total $ 0

Checkout Cart

128x128, General 1.5inch RGB OLED display Module, 16-bit high color

128x128, General 1.5inch RGB OLED display Module, 16-bit high color

Shipping: Ships within 5-15 business days

Price:

$18.39

Ship From:
  • China Warehouse
QTY:

Customers Who Bought This Item Also Bought

  • Description
1.5inch RGB OLED display module, 128x128 pixels, 16-bit high color, SPI interface

Overview

This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.

Features

  • 128x128 high resolution, 65K colors, clearly displays colorful images
  • Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Specifications

  • Driver: SSD1351
  • Interface: 4-wire SPI, 3-wire SPI
  • Display color: RGB, 65K colors
  • Resolution: 128x128
  • Viewing angle: >160
  • Operating voltage: 3.3V / 5V
  • Dimension: 44.5 x 37 (mm)

Interface

SYMBOL DESCRIPTION
VCC Power (3.3~5V input)
GND Ground
DIN Data input
CLK Clock data input
CS Chip selection, low active
DC 4-wire SPI: Data/Command selection (high for data, low for command)
3-wire SPI: Connects to GND, keeps low
RST Reset, low active

There are two available drive interfaces for this RGB OLED module: 4-wire SPI (default) and 3-wire SPI:

? BS DC
4-wire SPI 0 DC
3-wire SPI 1 Connects to GND

Dimensions

Development Resources

www..com/wiki/1.5inch_RGB_OLED_Module

Selection Guide

Part Number Color Resolution Display Size (mmxmm) Interfaces Driver Dimension (mmxmm) Pinheader
0.91inch OLED Module White 128x32 22.385.58 I2C SSD1306 36.0x12.5 PH2.0 connector
0.95inch?RGB?OLED?(A) 65K colorful 96x64 20.14x13.42 SPI(4-wire?SPI) SSD1331 31.7x37.0 angled/horizontal
0.95inch?RGB?OLED?(B) 65K colorful 96x64 20.14x13.42 SPI(4-wire?SPI) SSD1331 31.7x37.0 straight/vertical
0.96inch?OLED?(A) 1/4 yellow section, 3/4 blue section 128x64 21.7x11.2 3-wire?SPI, 4-wire?SPI, I2C SSD1306 33.0x33.5 angled/horizontal
0.96inch?OLED?(B) 1/4 yellow section, 3/4 blue section 128x64 21.7x11.2 3-wire?SPI, 4-wire?SPI, I2C SSD1306 33.0x33.5 straight/vertical
1.3inch?OLED?(A) Blue 128x64 29.42x14.7 3-wire?SPI, 4-wire?SPI, I2C SH1106 40.5x37.5 angled/horizontal
1.3inch?OLED?(B) Blue 128x64 29.42x14.7 3-wire?SPI, 4-wire?SPI, I2C SH1106 40.5x37.5 straight/vertical
1.5inch OLED Module White (16 gray scale) 128x128 26.86x26.86 4-wire?SPI, I2C SSD1327 44.5x37.0 PH2.0 connector
1.5inch RGB OLED Module 65K colorful 128x128 26.86x26.86 3-wire?SPI, 4-wire?SPI SSD1351 44.5x37.0 PH2.0 connector

Note: the 0.96inch?OLED consists of 1/4 yellow upper section and 3/4 blue lower section, not a regular dual-color display.

Customers Who Viewed This Item Also Viewed

top